|
Flatware Recovery Systems Inc. |
|
Ph: 517.803.2652 |
|
1) Will the FRS Flatware Detector work with high grade stainless and true silver flatware? 1) Yes.... Since the FRS Flatware Detector is not a magnet but a true precision metal detector the metal composition of the flatware or ramekin is not a factor.
2) Does the FRS Flatware Detector require an 110V. outlet at the point of service? 2) No.... The FRS Flatware Detector uses a battery pack similar to that of a laptop computer. The recharge can be accomplished overnight and it should last for two to three days. Depending on the amount of use.
3) How do I clean the FRS Flatware Detector ? 3) The FRS Flatware Detector May be cleaned with a damp rag and mild soap.
4) Can I Place the FRS Flatware Detector in the dishwasher or submerge it in water? 4) No.... Placing the FRS Flatware Detector in the dishwasher or submerging it in water or intentionally spraying water on to the unit will void the warranty and may damage the electronics in the detector.
5) What does FRS Flatware Detector warranty cover? 5) 1 YEAR LIMITED WARRANTY Flatware Recovery Systems Inc. warrants to the original purchaser, for a period of 12 months from the date of purchase, that this product shall be free of mechanical defects in material and workmanship. Our obligation hereunder is limited to repair or replacement, at our option, of this product during the warranty period provided the product is sent postage pre-paid directly to Flatware Recovery Systems Inc. Return material authorization (RMA) is required.
6) Will the FRS Flatware Detector create a slow down in the Bussing area? 6) No.... With a large 8.5 inch center opening the FRS Flatware Detector will allow rapid waste disposal while at the same time forcing the waste to the center of the trash can thus maximizing the capacity of the trash bag.
7) How will the digit counter help me control flatware losses? 7) The digit counter adds a visible numerical count every time the metal detecting field is broken. What this means is that every time a piece of flatware or a metal ramekin is thrown into the garbage not only do you get an audible alarm, but the digit counter will add a visible count. The only way that the count can be reset is with the managers key. This guarantees accountability for the losses on a given shift or by a particular individual.
8) What is the mute mode for? 8) The mute mode allows for the use of the flatware Detector in areas where noise must be kept to a minimum, such as when bussing is taking place during an banquet address by a speaker or in a meeting situation. The functionality of the flatware detector remains the same only the audio alarm portion is muted, the audio alarm is replaced by a red detect LED. The digit counter function remains unchanged.
1) How deep will the Linen Wizard III penetrate into the laundry bag? 1) The working penetration depth of the Linen Wizard III through soiled linen is approximately 6.
2) Since my linen bag is larger than 6 in diameter how do I insure accurate detection of flatware? 2) In almost all instances it will be necessary to make six to eight passes on the outside of the full linen bag, in an up and down motion. to guarantee an accurate inspection. This will take only 15 to 20 seconds.
3) How long will the battery last? 3) A standard 9.0v alkaline battery should last approximately 80 hrs. of use. Since you would turn the Linen wand on check your linen bag and then turn it off battery replacement should only be necessary once or twice per year.
4) What is does FRS Linen Wizard III warranty cover? 4) 1 YEAR LIMITED WARRANTY Flatware Recovery Systems Inc. warrants to the original purchaser, for a period of 12 months from the date of purchase, that this product shall be free of mechanical defects in material and workmanship. Our obligation hereunder is limited to repair or replacement, at our option, of this product during the warranty period provided the product is sent postage pre-paid directly to Flatware Recovery Systems Inc. Return material authorization (RMA) is required.
|
|
FAQ Concerning the FRS Linen Wizard |
|
FAQ concerning the FRS Flatware Detector |