Flatware Recovery Systems ™Inc.

Ph: 517.803.2652

Main        Pricing        Order        F.A.Q.        Specifications        Contact

 

 

 

 

FRS Flatware Detector™: A top mount unit that is a precision discriminating metal detector with an audible alarm, the alarm has a keyed volume/mute switch and red LED which will flash in the mute mode. The Flatware Detector uses a 3 digit LED counter that is resetable only with the manager’s key for accumulative monitoring of every alarm that the Flatware Detector™ has registered. The Flatware Detector™  uses a removable, replaceable battery pack  with charger.

 

Body:  The body of the FRS Flatware Detector™  unit is constructed of high-density injection molded ABS plastic.  The ring is sloped to the center opening of 8.5 inches.  The edge of the ring is flanged to securely fit the top of standard Rubbermaid 32 gallon garbage cans.  All electrical components are housed in the Control unit on the side of the ring.

 

Metal detecting coil:  The metal detecting coil is securely fastened to the inner ring of the unit. The coil is potted in an epoxy compound, protecting it from both moisture and vibration.

 

Electrical Components:  The electrical components of the FRS Flatware Detector™  are located in the side of the unit including the battery making it truly self contained. All components of the electrical system are potted in an epoxy compound; all joints are rubber gasketed to keep them safe from moisture and food particles.

 

 

 FRS Flatware Detector™  USA Patent Number 6833789

 

        

 

 

 

 

 

 

The FRS Linen bag hand wand is the most advanced and most powerful and the only Linen bag wand available. It's powerful coils and state of the art electronics allow the unit to be used in high traffic applications where precise detection is critical. The FSR powerful long range coils and unique vibration capability allows the unit to be used quickly and easily. The powerful scanning head allows for deep penetration of Linens, containers, and surfaces where Flatware may hide unseen
Dimensions: Length 15 in., Width 3-1/8 in., Height 1-1/8 in. Weight: 13 oz.

Types of Metal Detected: Responds equally well to all types of metal, steel, stainless steel, zinc, magnesium, and aluminum.

Electronics: Unit operates with an automatic tuning transmit/receive circuit. Provides precision detection pattern which helps prevent false alarms from rebar in floors and other surrounding metal.

Operating Frequency: 13 kHz / 6,600 Hz.

Power Requirements: One nine volt battery; standard alkaline, Typical battery life is eighty hours.

Switch: On / Off and stay on switch.

Alarm Indicators: Piezo tone beeper and LED RED light indicator are used to indicate the presence of metal.

Low Battery Indication: When battery drops down to 6.0 volts the unit operates with a warble tone and flashing light instead of the normal steady tone and light indicating a low battery. The unit will operate properly as the battery drops well below 5 volts. Once below 3 volts units will emit constant beep tone until unit shuts off.

Sensitivity: At maximum setting the unit will detect flatware at 9”. The detectors' sensitivity is fully adjustable through an access hole in the handle to prevent tampering while providing convenient and easy adjustment.

 

 

 

 

 

 

 

 

· Magnet has a powerful 70lbs. Pull capacity

 

· 32 inch handle for easy reach retrieval of flatware from garbage cans

 

· Sturdy design for long service

 

· Large 2.625 inch shallow potted ceramic magnet

Specifications

FRS Flatware Detector™

FRS Linen Wizard III

FRS Magnetic Flatware Recovery Tool

Main   Pricing   Order   F.A.Q.   Specifications   Contact